COMPOSITION AND PRINCIPLE OF THE HEATING FILM

Thanks to its small thickness and simple installation, it is possible to use the heating film in practically any space. The most common solution used in most buildings is underfloor heating. Trivolt infrared heating film is produced in two widths, 50 cm and 100 cm.

Heating film is made of those layers:

  1. COOPPER BUSBAR – serves as a power supply for the heating carbon layer along the entire length of the belt.
  2. CARBON PASTE – thick heating foil material that must be mixed in the correct ratio for the required performance.
  3. CUTTING POINT- marked place for cutting the heating film.
  4. TOP PET FOIL COVER – is actually a top layer of film that provides protection against moisture, access of water vapor, gas and liquids, is resistant to high temperatures and at the same time serves as protection against mechanical damage.

PERFORMANCE OF THE HEATING FOIl

TRIVOLT heating foils are offered in two performance levels:. To simplify the designation, we have power variants labeled 80W = L (low) and 140W = H (High)

Trivolt ONE with a thickness of 0.38 mm has the marking:

  • 80 W/m2 (TRO 100L, TRO 50L)
  • 140 W/m2 (TRO 100H, TRO 50H)

Trivolt EVOwith a thickness of 0.45 mm has the marking:

  • 80 W/m2 (TRE 100L, TRE 50L)
  • 140 W/m2 (TRE 100H, TRE 50H)

For standard floating floors and well-insulated new buildings, the 80 W/m² option is generally adequate. The 140 W/m² foil is typically used under floating floors or under a layer of Fermacell floor boards to prevent direct contact with the floor. This higher-performance foil is ideal for older or less well-insulated spaces.

series
…		ModelWidth
[cm]		Power
[W/m]		Power
[W/m²]		Thickness
[mm]		Max temperature
[°C]		Max length
of one strip [m]		Max power
of one strip [W]		Current
[A]
TRIVOLT ONETRO 100L10080800,38~ 321411204,87
TRIVOLT ONETRO 50L5040800,38~ 322410004,35
TRIVOLT ONETRO 30L3020800,38~ 32204001,73
TRIVOLT ONETRO 100H1001401400,38~ 40811204,87
TRIVOLT ONETRO 50H50701400,38~ 401611204,87
TRIVOLT ONETRO 30H30351400,38~ 40186302,73
TRIVOLT EVOTRE 100L10080800,45~ 321411204,87
TRIVOLT EVOTRE 50L5040800,45~ 322410004,35
TRIVOLT EVOTRE 30L3020800,45~ 32204001,73
TRIVOLT EVOTRE 100H1001401400,45~ 40811204,87
TRIVOLT EVOTRE 50H50701400,45~ 401611204,87
TRIVOLT EVOTRE 30H30351400,45~ 40186302,73

UNDERFLOOR HEATING TRIVOLT ONE

TRIVOLT ONE is a carbon heating foil, featuring a reinforced construction with a thickness of 0.38 mm, making it ideal for installation under floating floors. Its greater thickness compared to standard heating foils contributes to its durability and performance. The top protective layer enhances the system’s resilience and longevity, ensuring it can withstand rough handling and maintain its effectiveness over time.

USE OF HEATING FILM TRIVOLT ONE

  • under floating floors or under a layer of Fermacell floor boards

MAIN ADVANTAGES

  • Exceptional Quality at a Competitive Price: Offering high performance at an affordable cost.
  • Slim Profile only approx. 6 mm with Insulation mat XPS 700.
  • Enhanced Durability: Features durable PET layers with an extra protective top layer for increased resilience and dependable operation.
  • Advanced Safety: The connection between the carbon layer and copper busbar is reinforced with a silver ladder structure to prevent sparking.
  • Even Heat Distribution: The “safe spread” carbon matrix ensures consistent heat distribution, avoiding hot spots and uneven floor heating.
  • Custom Fit: Foil can be cut at marked locations for precise adaptation to room dimensions.
  • Extended Warranty: Up to 15 years warranty when installed by an authorized partner, ensuring long-term peace of mind.

UNDERFLOR HEATING TRIVOLT EVO

TRIVOLT EVO is a premium quality carbon heating film with a reinforced construction and a thickness of 0.45 mm. The top protective layer of extra reinforced laminate ensures perfect protection of the entire system even when installed under the creed.

USE OF INFRARED FOIL TRIVOLT EVO

  • offering versatile application options – under screed or under a layer of Fermacell floor boards

MAIN ADVANTAGES

  • Exceptional Quality at a Competitive Price: Offering high performance at an affordable cost.
  • Enhanced Durability: Features durable PET layers with an extra protective top layer for increased resilience and dependable operation.
  • Advanced Safety: The connection between the carbon layer and copper busbar is reinforced with a silver ladder structure to prevent sparking.
  • Even Heat Distribution: The “safe spread” carbon matrix ensures consistent heat distribution, avoiding hot spots and uneven floor heating.
  • Custom Fit: Foil can be cut at marked locations for precise adaptation to room dimensions.
  • Extended Warranty: Up to 25 years warranty when installed by an authorized partner, ensuring long-term peace of mind.