HEATING MAT TRIVOLT

The heating mat consists of a thin heating cable laid on a self-adhesive fibreglass mesh. With an electric heating mat we can create underfloor heating in any space.

Installing a heating mat under the tiles

The installation of the electric heating mat is easy because the fibreglass mesh on which the heating wires are attached is self-adhesive. This makes it easy to glue the heating mat to the substrate. Lay out the heating floor mat, rub in the adhesive and lay the tiles. We use flexible adhesives to bond the heating mats and tiles.

  1. Tiles
  2. Flexible tile adhesive
  3. TRIVOLT heating mat
  4. Concrete screed (floor)

HEATING MATS - PARAMETERS

The heating wires themselves are Teflon-coated which provides extreme resistance to high temperatures up to 250 °C. The width of the heating mat is always 50 cm and is available in different lengths according to the table below. The heating mat is always made to a fixed length and cannot be shortened.  The top PVC insulation is resistant to a temperature of 105 °C. The maximum temperature achievable with the mat is up to 75 °C.

wdt_ID MODEL DIMENSIONS POWER SURFACE CABLE LENGTH CABLE DIAMETRER
2TR-2P-100,5m x 2m160 W1,0 m210 m⌀ 4,3 mm
3TR-2P-150,5m x 3m240 W1,5 m215 m⌀ 4,3 mm
4TR-2P-200,5m x 4m320 W2 m220 m⌀ 4,3 mm
5TR-2P-250,5m x 5m400 W2,5 m225 m⌀ 4,3 mm
6TR-2P-300,5m x 6m480 W3 m230 m⌀ 4,3 mm
7TR-2P-350,5m x 7m560 W3,5 m235 m⌀ 4,3 mm
8TR-2P-400,5m x 8m640 W4 m240 m⌀ 4,3 mm
9TR-2P-500,5m x 10m800 W5 m250 m⌀ 4,3 mm
10TR-2P-600,5m x 12m960 W6 m260 m⌀ 4,3 mm
11TR-2P-700,5m x 14m1120 W7 m270 m⌀ 4,3 mm
12TR-2P-800,5m x 16m1280 W8 m280 m⌀ 4,3 mm
14TR-2P-1000,5m x 20m1600 W10 m2100 m⌀ 5 mm
15TR-2P-1200,5m x 24m1920 W12 m2120 m⌀ 5 mm
16TR-2P-1400,5m x 28 m2240 W14 m2140 m⌀ 5 mm