REGULATION OF HEATING FILM

For floor heating system using heating film, a thermostat with a floor temperature sensor must be used. If we place the heating foils directly under the floating floor, the thermostat will switch more often, but the floor will have a faster start-up. With the option of placing the heating film under the screed, we get an accumulation system that keeps the heat longer.

  • the floor temperature sensor limits the maximum temperature and prevents the floor from overheating
  • the air temperature sensor built into the thermostat switches on the underfloor heating as needed
  • If the floor is heated, the heating is not switched on but waits until the heat is transferred to the room and the floor cools down
  • Standard temperature for floor is 27 °C

REGULATION OF HEATING MATS

The heating mat is a heating cable attached to a fiberglass seld-adhesive mesh. The mat can be placed directly on the floor, on which the tiles are then glued. For a faster heating-up, a layer of XPS (min. 1 cm) can be placed under the mat, XPS must be selected so that it is heat-resistant up to 80 °C. It must also be firmly glued to the floor.

  • With primary TEFLON coating, dual core structure and tin braids, the Mat type is with superior electric insulation and provides safety with electromagnetic shield
  • the electric heating mat is installed directly under the tiles,  just use flexible adhesive
  • it does not increase the height of the floor, so it can be used in any room
  • immediate heating of the floor and start of floor heating
  • it is necessary to regulate the floor temperature and use a floor temperature sensor
podlahove-vykurovanie-v-kupelni

SMART TERMOSTAT WITH WIFI

Controlling the system is simple and enables precise temperature adjustment for individual rooms. There are a variety of electronic thermostats on our offer, including thermostats with an app and easy programming, thanks to which you can easily adjust the temperature in the house to suit the time when you return from work or when you are about to go to bed. Devices with a built-in WiFi connection are especially suitable for cottages, where you can remotely use the application to turn on the heating before arrival.

ZONE regulation of ROOM TEMPERATURE

Zone heating control is a system that allows independent control of the temperature in each room or area independently of other rooms. You usually want to have a pleasant warmth in the living room, you will have the bathroom preheated to 24 °C before you usually go to wash, and in the bedroom a pleasant 19 °C is enough for a healthy sleep. The guest room can be set up to 17 °C when you are not expecting a visitor. Energy saving also lies in this. Of course, the setting depends solely on you, and you can adjust the temperature by clicking on your mobile phone.